Introduction & Cabinet Origins
Accessories
Coin
Door
The Happ Controls Over/Under Door with Cashbox (Happ part# 40-0038-00) came with yellow reject buttons. For a more authentic look, I replaced the yellow buttons with red ones (Happ part# 42-0517-00).
Speakers
I filled in the old speaker cutouts and made new openings with a hole saw. Two new Happ 4" shielded speakers (Happ part# 49-0228-00) replaced my cabinet's lone speaker. I covered them with 4" round Happ speaker grilles (Happ part# 49-5181-00).
Monitor Bezel
The Happ 19" black plastic bezel (Happ part# 49-0105-00) looks great. Before I trimmed it to fit my cab, it measured 25" x 25". The monitor is just slightly flatter than the bezel allows for; however, the resulting space is very minor.
Lighting
I bought a corded 18" florescent light to replace the original wired incandescent fixture. It produces an even light and the florescent bulb runs much cooler than the incandescent bulbs.
Leg
Levelers
The original leg levelers were rusty and bent. I replaced them with 1/2" levelers and plates (Happ part#s 49-1002-038 and 49-1501-00).
Fan
I cut a hole in the top of my cab, but I never installed a fan. With all of the openings in my cab, heat buildup hasn't been an issue. However, I installed the finger guard to finish off the hole (Happ part# 80-0006-20).
© pccab.net 2001-2002. All rights reserved.
Mentioned trademarks belong to their respective owners.
